Johnson Engine Technology, Inc.™
T.(401)596-9507
F.(401)596-6984
(9am-6pm EST)
Dyno
Tuning and Fuel Mapping |
|
Johnson Engine Technology, Inc. now has the new Dyno Jet 250 with WinPep 7 software, Eddy Current and DynoWareEX+ Dyno Hardware stack, stacked with an Atmospheric Sensing module, RPM module, Dynamometer Input/Output module, CPU module, as well as an Air/Fuel ratio module. Our new dynamometer sets us even farther above the rest. We are able to better assimilate road conditions, increase your power, lower your vibration, and increase the reliability of your motorcycle. Make an appointment for your bike today!
As quoted from Dyno Jet's web site, "The MODEL 250 Load Control Dynamometer is perfect for engine break-in, durability testing and fuel injection mapping. It's like getting two Dyno's in one package as all the features of the Dyno Jet Inertia Dynamometer are maintained."
Below are some links to Dynojet. These pages will give you an idea what our new Dynojet 250 can do for you:
- the Dynojet 250 Dynamometer
- the DynoWareEx+ Dyno Hardware (What are all those modules for?)
- the Air/Fuel Ratio Module
|
LABOR |
J.E.T. Labor # |
Cost |
| Dyno Tune (set timing, check jetting, 3 Runs) | DT.651 |
65.00 |
| Hourly Rate After 3 Runs | DT.652 |
75.00 |
| Install J.E.T. Modified Fuel Map | DT.653 |
200.00 |
| Install Gas Analyzer for fuel injected motorcycles (we can tell you how much oxygen is coming out of your tail pipe) | DT.654 |
100.00 |
PARTS
Air Cleaners | Camshafts | Carburetors | Crankshafts |Cylinder Heads | Engines | Gaskets | Igniton Modules | Intake Manifolds | Oils | Pistons | Push Rods
To The Top | Links | Dyno Run Page | HOME | Email J.E.T
"We back our work with performance...not excuses!"
Copyright 2002 Bob Johnson
God is blessing America!